Sell artificial graphite crushed

Graphite artificial crushed - designed for carburizing of iron and steel in open hearth, BOF and electric arc processes for steelmaking with reduced share of iron in the mixture, foaming of slags in metallurgical processes, in the manufacture of carbon and graphite materials and products, as filler for coating and as stand-alone products in other consuming industries. As a Supplement, increase the level of carbon in the metal, naegleriasis is selected based on the characteristics of the technological process. There are carbonaceous materials with a high ash levels in particular, nut coke, anthracite, or any other substitute for coke with lots of impurities — sulfur, nitrogen, oxygen and hydrogen. Naegleriasis with a low level of ash content obtained by graphitization of the raw materials are carbonaceous materials in which the ash content is only 1-1,5% against the original 5-8%. This greatly affects the quality of the metal that will enrich carbon with naegleriasis. Depending on the preparation, temperature of production, size of fraction used at work, carbonaceous materials are used for smelting iron or steel. Milled artificial graphite reduces the cost of metallurgical technologies, while improving product quality. The importance is not only the degree of purification from impurities, but also the degree of grinding of naegleriasis. Use graphitemoderated materials as nowheresville guarantees fast saturation of the metal with carbon. Granular graphite GHEE evenly and dissolves quickly in the mirror of the metal even at relatively low temperature. The carbon absorbed by the melt so that the metal does not form a crust, and nagarajuna occurs with a high degree of uniformity.